Friday, March 20, 2015

Last 3 Months' Strategy for IES-2015 : Conventional Papers

 The strategy for conventional papers is almost similar to that of objective papers but first let's have a look at the structure of conventional papers. 


Structure of Conventional Papers:

Each conventional paper consists of 7 questions. The first question is compulsory and it contains sub-questions from all the subjects. Out of rest of the 6 questions, we have to attempt any 4 questions. Each of these question contains sub-questions from only one subject. 

It is not necessary to attempt questions serial wise but all parts of a question must be attempted continuously. 


Some Insights into the Subjects: 

Subjects like Network Theory, Signals and System, EDC, Digital Electronics, Control Systems etc. are easier in my opinion. They are purely numerical. Theoretical questions are seldom asked from these subjects except for EDC. Most of the numericals are based on a formula or a technique (e.g. in control systems many times questions have been in asked from Routh Horowitz Criterion ). 

We have already prepared these subjects in detail for GATE exam. Study material is easily available. These subjects can be prepared with least amount of effort. Hence we should prepare these subjects first and thoroughly.

Electromagnetic Theory is purely numerical subject but with difficult mathematical analysis.

Materials and components is largely a theoretical subjects. So is 'Microprocessor and Computer Engineering' if you are good with programming part. Many theoretical questions have been repeatedly asked from EDC. 

Microwave contains both theoretical and numerical questions. It has a large syllabus. It becomes bit tricky because of very difficult to remember formulae it contains. 

Analog Electronics and Communication Systems have large syllabus both theory-wise and numerical-wise.

Types of Questions being Asked:

Many of the questions are direct. They are based on a formula or a  technique or a simple concept. Sometimes a simple theoretical question (Difference between direct and indirect band gap semiconductor) is asked. The first question in both paper generally consist of such questions only. You have solved such questions in GATE exam and even in objective paper. These questions are abundantly covered in all coaching class notes, guides etc. Hence the preparation for these questions is not very challenging. 

The problem is with the rare kind of question which are generally not covered in coaching classes.

Many times few questions are repeated from a previous question paper. For example Question 3(b) in Paper 2 of 2014 is sequence generator problem. This question was also asked in 1983 question paper. UPSC can go that back!!! That is why it is absolutely necessary to solve all the previous year question papers. 

Prior to 2003 conventional question were also asked in GATE. Sometimes a similar question is asked from those. For example a question similar to 3(b) in Paper of 2014 was asked in 1990 paper of GATE. Two marker questions of recent GATE are also important for conventional point of view. 

Sometimes solved examples of standard books are also asked. In 2013 Paper-2 Q.3(b) has been directly asked from Morris Mano book.

A decent number of theoretical questions are asked every year so one should not commit the mistake of leaving theory.

Apart from all the above types of questions there will be some questions which are very tough. Since less than 3 months are remaining now hence it is prudent that we focus on what can be easily handled in such a short period of time.



Strategy :

In my earlier post I wrote that objective papers are about range of your knowledge. There is a bit change in the statement here. Subjective papers are about depth of your knowledge about the subject. Hence it is necessary that you should prepare 5 subjects in depth for each paper. However you should not completely neglect the sixth subject as the first question will contain a 5-marker from it.

1) First prepare easier subjects like networks, EDC (mentioned before) etc.
2) Solve all the previous year question papers. Ace Academy books are good for this purpose for two reasons : first, they have subjectwise and chapterwise classification of the problems. Second, they cover questions from 1980s i.e. more than 33 years of questions. 
3) Once you are done with IES papers, solve GATE papers. Pay more attention to conventional questions and 2-markers. 
Remember the purpose of solving IES and GATE problems is to be acquainted with diverse type of problems. Hence you can leave the repetitive questions.  
4) Keep reading the theory simultaneously. Analyzing the previous years paper would help in filtering important concepts from less important ones.
5) If time permits, try to solve examples from standard books. [I am asking to solve the examples at the last because of paucity of time. While solving examples don't waste time on the questions with which you are very well familiar. Try to look for more diverse problems.]
6)Keep analyzing and keep improvising.

When you are solving a numerical question, solve it till you reach the answer. Don't deceive yourself by thinking that you know the method and answer would be right. Because if you can't solve it here, how will you solve it under pressure in exam. [I committed the same mistake for 8085 programming. A 20-marker came. I thought I knew the logic but could not write the code.] We humans are animals of habit. What gets repeated also gets permanent. 

When solving problems in exam, write in a neat and clean manner. There is no limit on the space for answer. You can take supplementary copies. Remember that you have to solve all sub parts of a question together however questions can be attempted in any order. So solve the questions which are easiest first. 3 hours are more than sufficient for 5 questions so don't panic about time.

That's it for this post. If you have any comment /query /criticism/ suggestion kindly leave in the comment box. I will be more than happy. I will try to write about GS preparation in next post.

Thanks for visiting my blog :-) And if you like it kindly share it with your friends on facbook and google+.

33 comments:

  1. is it necessary to start a new question from a frsh right hand side of answer sheet? and what about the subsections of the questions?

    ReplyDelete
    Replies
    1. No. It's not necessary. Just start from a new page. Do all subsections together.

      Delete
  2. Subsections of a questions are to be attempted at one place in continuity. I am not aware of any such rule which necessitate starting a question on fresh right. But there is lots of space and supplementary sheets are available so one can start a new question at a fresh page (not necessary though!)

    ReplyDelete
  3. Thanks for the information it was very helpful to me. I think the level of GATE and IES are equal so I thnk that it will be good for the dtudent who has studied GATE books.

    ReplyDelete
  4. It was very nice post and the information you have given was very useful.
    Please post something about GATE syllabus 2016.

    ReplyDelete
  5. Shall i start preparing conventional questions from now considering that GATE exam is in February?

    ReplyDelete
    Replies
    1. Yes you should. Conventional paper preparation will clear your concepts. But only devote 1 - 2 hours everyday. If you are not confident with GATE papers you should focus on them only.

      Delete
  6. I want to know if Blank sheets are provided or Ruled sheets because my writing is not so good in blank sheets

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. Do i need to attempt all sub parts of a question or can i skip any sub part if i don't know about it.

    ReplyDelete
    Replies
    1. When you don't know an answer your only choice is to leave it.

      Delete
    2. When you don't know an answer your only choice is to leave it.

      Delete
  9. From where should I prepare for conventional
    I mean shoukd I go for standars books r should I refer my made easy study material?
    Ur post is really helpful thank u so much

    ReplyDelete
    Replies
    1. Try to solve previous year paper. If you cannot understand the concept then go for standard books. I have not seen Made Easy material. I have read only there hand written notes.

      Delete
  10. From where should I prepare for conventional
    I mean shoukd I go for standars books r should I refer my made easy study material?
    Ur post is really helpful thank u so much

    ReplyDelete
    Replies
    1. No seperate notes are required for conventional papers. Just start solving the questions. If you encounter any problem, refer to standard books or notes or your friends for the solution.

      Delete
  11. do we also have to prepare GATE papers of related stream, such as electrical, instrumentation etc while preparing for E&t?

    ReplyDelete
    Replies
    1. Only when you are done with ese papers and gate papers of your own stream. A little extra effort never goes in vain.

      Delete
    2. You will not get that much time. Focus only on your stream.

      Delete
  12. Sir can you please arrange for some of those repeated questions in IES (mainly for paper 2 subjects like power system, power electronics and analog electronics)

    ReplyDelete
    Replies
    1. Sorry Prabal. I have not studied power systems and power electronics. Moreover I have become cut off from technical subjects now. So you have to do it yourself.

      Delete
  13. Sir for control systems subject do we need to use the semilog paper in the exam for some bode plot questions?

    ReplyDelete
  14. Sir for control systems subject do we need to use the semilog paper in the exam for some bode plot questions?

    ReplyDelete
    Replies
    1. It will be mentioned in the question. If semi log paper is required, they will provide the same.

      Delete
  15. people said that conventional is avery tough .how can u overcome it

    ReplyDelete
    Replies
    1. This post is all about overcoming the toughness of conventional papers. Read it again.

      Delete
  16. from where i can find conventional notes or previous year answers??

    ReplyDelete
  17. sir. i am varun. i am a first year student. i am an electrical engineer. My question is how to prepare for IES EXAM?

    ReplyDelete
  18. Material of which classes is best for ECE branch ? You have any idea about handwritten class notes of Panacea institute of Delhi ?

    ReplyDelete